No shipyards available.
Monarch (Streuer) Specifications
Main Specs
Length, m | 4.95 |
Beam, m | 1.90 |
Draft, m | 0.97 |
Displacement, kg | 350.00 |
Classification
Hull Type | Lifting Keel |
Hull Material | FG |
Rigging and Keel
Rig | Cat (Marconi) |
Keel | Lead |
Max Draft, m | 0.97 |
Min Draft, m | 0.37 |
Manufacturer Information
# Built | 400 |
Designer | Heribert Streuer |
Period of manufacturing | 1966 - 1966 |
Technical Specs
LOA, m | 4.95 |
Sail Area (S.A.), m² | 12.17 |
Ballast, kg | 108.00 |
Sailboat Calculations
SA/D = SA (ft²) ÷ [Disp (lbs) / 64]^0.666
A sail area/displacement ratio below 16 would be considered under powered; 16 to 20 would indicate reasonably good performance; above 20 suggests relatively high performance.
Bal./Disp = ballast (lbs)/ displacement (lbs)*100
A Ballast/Displacement ratio of 40 or more translates into a stiffer, more powerful boat that will be better able to stand up to the wind.
CSF = Beam ÷ (Disp in cubic ft)^(1/3)
Designed to determine if a boat has blue water capability. The CSF compares beam with displacement since excess beam contributes to capsize and heavy displacement reduces capsize vulnerability. The boat is better suited for ocean passages (vs coastal cruising) if the result of the calculation is 2.0 or less. The lower the better.
S.A. / Displacement | 24.96 |
Ballast / Displacement, % | 30.86 |
Capsize Screening Formula | 2.72 |