Flying Dutchman Specifications
Main Specs
Length, m | 6.10 |
Beam, m | 1.80 |
Displacement, kg | 130.00 |
Classification
Hull Type | Centerboard Dinghy |
Hull Material | Wood or FG |
Rigging and Keel
Rig | Fractional Sloop |
Manufacturer Information
Shipyard | Advance Sailboat Corp. (USA) Alpa Yachts (ITA) Binks Yacht Constructions Costantini (Chantier Naval Costantini) Lanaverre (FRA) Lockley Newport Boats (USA) MacKay Boats Ltd. Mader Bootswerft Mobjack Manufacturing Corp. Plastrend / Composite Technologies Sunbeam Yachts |
Country | USA |
Designer | Uus van Essen |
Association | sailifdco.com |
Period of manufacturing | 1951 - 1951 |
Technical Specs
LOA, m | 6.10 |
Sail Area (S.A.), m² | 18.58 |
Sailboat Calculations
SA/D = SA (ft²) ÷ [Disp (lbs) / 64]^0.666
A sail area/displacement ratio below 16 would be considered under powered; 16 to 20 would indicate reasonably good performance; above 20 suggests relatively high performance.
CSF = Beam ÷ (Disp in cubic ft)^(1/3)
Designed to determine if a boat has blue water capability. The CSF compares beam with displacement since excess beam contributes to capsize and heavy displacement reduces capsize vulnerability. The boat is better suited for ocean passages (vs coastal cruising) if the result of the calculation is 2.0 or less. The lower the better.
S.A. / Displacement | 73.69 |
Capsize Screening Formula | 3.58 |