Allures 45 Specifications

Main Specs
Length, m 13.98
Beam, m 4.43
Draft, m 1.05
Displacement, kg 11800.00
Classification
Hull Type Keel/CB w/dual rudders, Monohull
Type by Usage Cruiser
Hull Material ALU, Aluminum
Design Modern / Mainstream
Deck Arrangement With deck saloon
Rigging and Keel
Rig Fractional Sloop, Single-masted (sloop)
Keel Lifting keel
Max Draft, m 3.00
Min Draft, m 1.05
Cabins & Passenger Capacity
Max People on Board 10
Cabins 4
Berths for Guests 8
Engine
Engine Type Diesel
Tanks Capacity
Fuel capacity, l 549.00
Water tank, l 549.00
Manufacturer Information
Shipyard Allures
Country France
Model 45
Designer Berret-Racoupeau
Period of manufacturing 2011, 2013 - 2017
Technical Specs
LOA, m 13.98
Sail Area (S.A.), m² 99.96
Ballast, kg 4400.00
Sailboat Calculations
× S.A. / Displacement Formula
SA/D = SA (ft²) ÷ [Disp (lbs) / 64]^0.666
A sail area/displacement ratio below 16 would be considered under powered; 16 to 20 would indicate reasonably good performance; above 20 suggests relatively high performance.
× Ballast / Displacement Formula
Bal./Disp = ballast (lbs)/ displacement (lbs)*100
A Ballast/Displacement ratio of 40 or more translates into a stiffer, more powerful boat that will be better able to stand up to the wind.
× Capsize Screening Formula
CSF = Beam ÷ (Disp in cubic ft)^(1/3)
Designed to determine if a boat has blue water capability. The CSF compares beam with displacement since excess beam contributes to capsize and heavy displacement reduces capsize vulnerability. The boat is better suited for ocean passages (vs coastal cruising) if the result of the calculation is 2.0 or less. The lower the better.
S.A. / Displacement 19.69ℹ️
Ballast / Displacement, % 37.29ℹ️
Capsize Screening Formula 1.97ℹ️